PO-10
Power amplifier The PO-10 has both constant current and constant voltage control and can be controlled by both methods.
Features of the PO-10
- New Product
- Immediately deliverable
- Analog Input
- Compatible
- Inheriting the function of conventional machine PO-8B
- Power amplifier output is rated 24 VDC 4 A with a maximum of 30 VDC 5 A
- Switched between constant current control and constant voltage control
- The input signal level is variable from 0 to 10 V
PO-10 Product Specification
| Model | PO-10 |
|---|---|
| Power Supply | 100 to 240 VAC (-15 to 10%) 50/60 Hz ● Power supply for external volume +8 V fixed, volume: resistance 2 to 10 KΩ |
| Input | ● Input signal 0 to 10 V (variable) input resistance 10 KΩ |
| Output | ● Output current Rating: 0 to 4 A, 5 A max ● Output voltage Rating: 0 to 24 V, 30 V max ● Output ON/OFF function Output is ON when input is open, output is OFF when 24 V is applied Twisted pair wiring is used with length up to 3 m ● Overcurrent detection output ON when normal (Output contact capacity: 15 V 50 mA) |
| Ambient environment | Operating temperature range: 0 to 50ºC Operating humidity range: 35% to 85% or less (non-condensing) |
| Weight | Approx. 1.5Kg |
| Dimensions (W x H x D) | 105 x 190 x 115mm (124 mm including terminal block) |
| Power Consumption | Up to 240 W |
| Control features | Select between constant current control and constant voltage control with a switch |
| Protective function | Current is normally limited to 6 A. An overcurrent detection circuit activates to shutoff when 6.6 A is exceeded due to failure, etc. |
